Drying Oven for Curing Wood Paint Custom-Built for Siding Manufacturer

July 29, 2014

rn

rn

Drying Oven for Curing Wood Paint Custom-Built for Siding Manufacturer

rnnnnnrnnnnn

rnnnnn
• For curing water-based paint on fiber cement and wood boards

nnnnrnnnnn

• Gas fired drying oven with shuttle and transfer conveyor

nnnnrnnnnn

• Temperature: 150°F Operate, 200°F Maximum

nnnnrnnnnn

• Dwell Time: 4 minutes (in heat zone) @ 5 FPM

nnnnrnnnnn

• Water Load: 15 Gallons per hour (max.)

nnnnrnnnnn

• Product Load: 13,000 lbs. per hour (max.)

nnnnrnnnnn

• Maximum product width: 16”

nnnnrnnnnn

• Overall Oven Size: 51’‑6″ Long x 29’‑3″ Wide x 9’‑11″ High

nnnnrn

nnnnrnnnrn

SPECIAL FEATURES

rnnnPop-up Style Transfer Conveyer – Powered roller conveyor with high speed pop-up transfer chains located between rollers rapidly transfers the boards 90° from the in-line coater direction to the side travel oven/cooling direction.nnrnnnrnnnnnrnnnInboard Optical Sensor – Inboard optical sensor initiates transfer by sensing the trailing edge of the board.nnrnnnrnnnGraphical Operator Control Station – Control station supports ethernet connectivity, FLASH card for data storage, programming over the Internet, and networking capabilities with PLCs via ethernet.nnrnnnrnnnCirculation – 4 flash off fans and 3 cooling fansnnrnnnrnnnRef. # 7627nnrnnnrnnnrn

Contact us to learn more