Asynchronous Pallet Conveyors

Posted on 08/16/2012 at 4:37 pm.

Asynchronous Pallet Conveyors offer modular and flexible automation solutions for nearly any manufacturing challenge. They encompass four different conveying media; modular plastic belt conveyors, timing belt conveyors, chain conveyors, and accumulation roller chain conveyors.

There are also a variety of configuration possibilities, such as rectangular, over/under, parallel and in-line. The broad range of pre-engineered system modules increase flexibility and performance, as well as reduce lead time and project costs.

Pallet sizes up to 48″x48″ Load capacity up to 700 lbs per pallet Line speed up to 100 fps Repeatability ± 0.003″ Short lead times and outstanding quality.

Learn more: http://www.mknorthamerica.com/product-information/conveyor-systems/custom-conveyors.html

Pallet Conveyor System on YouTube

Laser Marking Demonstrations in Northern Indiana

Posted on 06/20/2012 at 8:54 pm.

Written by Craig Frazee

nnrn

Schedule your Laser Demonnrn

Today for 7/19/2012nnrn

Mecco Marking & Traceability nnrn

Mecco Marking and Traceability will be conducting laser marking system demonstrations in Northern Indiana. We will have one of our table top air cooled fiber laser marking systems available for a demonstration at your location. nnrn

Mecco Standard Marking Enclosure nnrn

This is a great opportunity for you to test laser mark on some of your parts and learn about our laser marking software.nnrn

Mecco Laser Marking Software nnrn

Please let us know if you would like to schedule a demonstration for your company so we can best accommodate everyone.nnrn

nnnnrn

nnrn

Craig Frazee

rnnnNorthern Indianannrnnnnn

Cell: 260-726-0884 Fax: 317-536-3179

nnnnrnnnnn

cfrazee@blettnerinc.com

nnnnrn

rn nnrn

Mecco provides lasers in both CO₂ and YAG wavelengths in several power levels and can manufacture workstations to meet most needs including automation and production line integration.nnrn

If you’re not able to make an appointment during this time you can always send us some of your parts to the address at the bottom of this e-mail for free application test marking or we can try to schedule you for another visit.nnrn

Mecco has been in the industrial marking business since 1889 and sells a variety of Dot-peen and Laser marking systems. nnrn

For more information contact one of the Blettner Engineering Teamnnrn

or visit Mecco Marking & Traceability on the web! nnhttp://www.mecco.comnn nnrn

rnnn

Laser Marking Demonstration at your location

Posted on 04/11/2012 at 12:58 pm.

Written by Craig Frazee

nnrn

Schedule your Laser Demonnrn

Today for the Week of 4/23/2012nnrn

Mecco Marking & Traceability nnrn

Mecco Marking and Traceability will be conducting laser marking system demonstrations in your area. We will have one of our table top air cooled fiber laser marking systems available for a demonstration at your location. nnrn

Mecco Standard Marking Enclosure nnrn

This is a great opportunity for you to test laser mark on some of your parts and learn about our laser marking software.nnrn

Mecco Laser Marking Software nnrn

Please let us know if you would like to schedule a demonstration for your company so we can best accommodate everyone.nnrn

nnnnrn

nnrn

Dale Blettner

rnnnCentral &nnSouthern Indianannrnnnnn

Office: 317-835-7168

nnnnrnnnnn

Fax: 317-835-7158

nnnnrnnnnn

Cell: 317-432-1514

nnnnrnnnnn

dale@blettnerinc.com

nnnnrn

Trent Blettner

rnnnSouthern IndianannKentuckynnSouthwest Ohionnrnnnnn

Cell: 317-370-1319

nnnnrnnnnn

Fax: 317-862-9682

nnnnrnnnnn

trent@blettnerinc.com

nnnnrn

Craig Frazee

rnnnNorthern Indianannrnnnnn

Cell: 260-726-0884

nnnnrnnnnn

Fax: 317-536-3179

nnnnrnnnnn

cfrazee@blettnerinc.com

nnnnrn

nnrn

nnnnrn

nnrn

rn nnrn

Mecco provides lasers in both CO₂ and YAG wavelengths in several power levels and can manufacture workstations to meet most needs including automation and production line integration.nnrn

Mecco has been in the industrial marking business since 1889 and sells a variety of Dot-peen and Laser marking systems. nnrn

For more information contact one of the Blettner Engineering Teamnnrn

or visit Mecco Marking & Traceability on the web! nnhttp://www.mecco.comnn nnrn

rnnn

New IAI S & M sizes added to the SSPA Series

Posted on 02/20/2012 at 3:11 pm.

Written by Craig Frazee

New S & M sizes added to the SSPA Series

rnrn

rnnnISB/SSPA Series Catalog (9.3 MB)nnrnnnCatalog #: CJ0172-2A-UST-1-0212nnrnPages: 60nnrnA major revamp of the single-axis robot IS series with improvements all around—from preciseness, rigidity and payload capacity to speed and acceleration/deceleration.nnrnnnClick to download the PDF Catalog.

new “mk QuickDesigner” software

Posted on 01/12/2012 at 11:16 am.

Written by Craig Frazee

mk QuickDesignernnrn nnrn

The new “mk QuickDesigner” software reduces engineering and order processing times by up to 80%. The use of “mk QuickDesigner” conveniently does not require CAD design software or even an in-depth CAD knowledge. The program is a user-friendly way to start the design project, fitted to the unique needs of your application.nnrn

nnrn nnrnnnrn “mk QuickDesigner” is a state-of-the-art and standalone pricing, planning and design tool for the easy and fast creation of perimeter guards made with mk Aluminum Framing Systems.nnrn nnrn

rnnnnnrn An easy to use 3D interface allows the quick design of a custom guard either by creating a 2D outline which the “mk QuickDesigner” uses to automatically create a 3D perimeter guard or by allowing the user to build and configure one panel at a time directly in a 3D environment.nnrn

“mk QuickDesigner” creates many advantages for the user, including:nnrn nnrnnnnn

Drastic reduction of engineering and design timennrn

nnnnrnnnnn

Easier, faster and more accurate order processing

nnnnrnnnnn

Automatic generation of cost estimates for parts, a detailed parts list, cut list, bill of materials list and weight estimates

nnnnrn

Reduced material costs by use of standardized componentsnnrn

nnnnrn

Standard and economy framing optionsnnrn

nnnnrn

Large variety of paneling, window and door options.nnrn

nnnnrn

No CAD software requirednnrn

nnnnrn

Easy-to-use interface with 3D graphicsnnrn

nnnnrn

Automatic creation of 2D and 3D drawingsnnrn

nnnnrn

mk parts application allows for IGES, STEP and JPEG export formatsnnrn

nnnnrn

Import .dxf layouts nnrn

nnnnrn

PDF user guide

nnnnrn

nnnnrn For additional “mk QuickDesigner” information, or to download “mk QuickDesigner,” please visit: http://www.mknorthamerica.com/guarding-enclosures/perimeter-guarding/mk-quick-designer.htmlnnrn