Deep Part Marking by Mecco Marking & Traceability

Posted on 12/30/2011 at 3:38 pm.

nnrnnnrn

Portable Deep Impact Markingnnrn

Many of our customers have parts too large to move easily that still need to be permanently marked with identification information. We provide several portable programmable marking systems for these needs with the industries best depth capability available of up to .020″ deep in mild steel.nnrn

nnrn

Established in 1889 Mecco maintains one of the largest knowledge bases for industrial identification methods with a focus on durable long lasting marks for even the harshest environments. nnrn

Contact us for free sample marking of your parts or possibly an on-site demonstration of our equipment at your location by one of our 20 local representatives located throughout North America. nnrn

For more information on our portable and other marking systems you can go to our website below, view some of our demonstration videos on YouTube or give us a call at your convenience.nnrn

http://www.mecco.com/dot-peen-portable.htmlnnrn

YouTube Videos Linknnrn http://www.youtube.com/user/MECCOMARK/videos

MECCO Marking & Traceability

Posted on 05/02/2011 at 4:37 pm.

Written by Craig Frazee

Direct Part MarkingnnLaser Marking & Engraving – Dot Peen Marking

rnnnMECCO Marking & Traceability is a leader in direct part marking, laser marking, laser engraving and dot peen machines for traceability and part verification. MECCO’s innovative solutions enable clients to permanently mark and trace just about any part—especially ones that must withstand the harshest environments and processes. nnrn

MECCO’s full range of cost-effective direct part, laser marking and dot peen marking technologies reflects the diverse applications of our clients. They can be found in workstations, portable and handheld part marking devices, and integrated production/assembly lines. These technologies include Laser Marking and Dot Peen Marking.

IAI America Newsfeed Effects of the Japan Earthquake on Porduction

Posted on 03/24/2011 at 1:14 pm.

Written by Craig Frazee

Effects of Japan Earthquake on Production rnPosted: 23 Mar 2011 04:28 PM PDTrnrnWe extend our deepest sympathies to all those who have been affected by the Tohoku Earthquake that hit Japan on March 11, 2011. rnrnAlthough the earthquake itself did not affect any of our production facilities, our supply chain for parts has been affected as explained below. We sincerely apologize for any inconvenience caused and ask for your understanding. rnrnWe are temporarily unable to obtain Nikon’s encoders that are equipped on our products as standard parts. Accordingly, we are taking the following actions as temporary measures:rnrn1. ROBO Cylinders RCS2 and RCS3 Series, Absolute Type rnrnnnnn

Affected models: RCS2-SA7C / SS7C / SS8C / SA7R / SS7R / SS8R / RA5C / RGS5C / RGD5C / RA5R / RGS5R / RGD5R, absolute type.rnRCS3-SA8C / SS8C / SA8R / SS8R, absolute type.

nnnn

nnnnrnnnnn

Measure: Change the part in question to a replacement part and change the model numbers of affected models.

nnnn

nnnnrnnnnn

Specific change: Change the encoder symbol in the model numbers of affected products from “A” to “TA.” rnExample:rnRCS2-SS7C-A-60-12-300-T2-SrntornRCS2-SS7C-TA-60-12-300-T2-S (The change is denoted in bold.)rnIn addition to the above, relevant controller parameters will be changed. However, there are no changes to the specifications, dimensions, prices, etc.

nnnn

nnnnrnrnnnnn

Effective from: Orders received on or after March 22, 2011.

nnnn

nnnnrnrn2. Nut Rotation Actuators NS Series rnrnnnnn

Affected models: NS-L, NS-M

nnnn

nnnnrnrnnnnn

Measure: We will stop accepting NS orders because there is no replacement part and the affected models cannot be manufactured.

nnnn

nnnnrnnnnn

Replacement models: No models are available that can be used directly in place of NS-L and NS-M actuators. Please contact IAI for details.

nnnn

nnnnrnnnnn

Period of not accepting NS orders: From March 22, 2011 until supply of affected encoders resumes.

nnnn

nnnnrnThank you.

IAI America Newsfeed on the Japan Earthquake and Tsunami

Posted on 03/16/2011 at 2:40 pm.

Written by Craig Frazee

Posted by: IAI America rnon: 15 Mar 2011 03:42 PM PDTrnrnWe would like to express our deepest condolences to the victims of the earthquake and tsunami in north eastern Japan.rnrnWe have received so many warm messages about the recent earthquake. We thank you for your concern. rnrnWe are happy to report at this time that all of our management, employees and their families are safe and accounted for. Our head office and factory have not received any damage.rnrnWe are investigating other impacts we may experience from our suppliers and the transportation situation in Japan. We will update information @ http://www.iaiquality.com once we learn any further details.rnrnIf you have any questions please feel free to contact our offices.

You Tube “MECCOMARK Channel”

Posted on 09/16/2010 at 8:41 pm.

Written by Craig Frazee

MECCO Marking & Traceability now has product videos and information on there own MECCOMARK Channel” at You Tube. Visit You Tube to see what is Marking at MECCO with almost 2 dozen application and product videos of the dot peen and laser systems from MECCO Marking & Traceability.nnrnnnrnnnhttp://www.youtube.com/user/MECCOMARK