June 12, 2014

rn

rn

Oven for Drying Lubricant from Motor Rotors Shipped by Infratrol

rnnnnnrnnnnn

rnnnnn
• Electrically heated oven, 300°F Operating Temperature, 400°F Maximum Temperature

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• 16’6″ overall length, 6’6″ heated length, 5’0″ cooling by propeller fan

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• Product Information: Aluminum & Steel rotors; 5″ diameter, 5 lbs. each; 4,000 lbs. per hour through the oven

nnnnrn

nnnnrnnnrn

Special Features

rnnnPortable Oven – Oven is compact enough to be moved around the customer’s facility.  Having the equipment electrically heated makes portability easier as well. nnnnrnnnrnnnForced Air Cooling – Two 30″ diameter propeller fans mounted above the product force air onto the parts to cool them enough to be handled and unloaded by the customer.nnrnnnrnnnConveyor System – A flat wire steel belt transports the parts through the oven.  This conveyor includes a variable frequency drive (VFD) on the motor in order to easily adjust the speed, and overload protection to protect the conveyor in-case of a jam.nnrnnnTop-Down Airflow – The top air supply duct forces the heated air onto the product below.  This air supply design maximizes air impingement onto the product, ensuring the driest possible product. nnrnnnrn

rn

rn

rn

rn

rn

rn

rn

rnnnRef #7433nnrnnnrn

Contact us to learn morenn

rnnnnn

June 26, 2014

rnnnrn

Epoxy Curing Oven Supplied to Electronics Manufacturer

rnnnnnrnnnnn

rnnnnn
• For curing epoxy on electronic modules

nnnnrnnnnn

• Manually loaded, dual lane indexing chain conveyor system

nnnnrnnnnn

• Parts carried on trays

nnnnrnnnnn

• Maximum product size: 18” w x 19” l x 2.5” high

nnnnrnnnnn

• 185º F (85º C) Operating, 212º F (100º C) Maximum

nnnnrnnnnn

• Electrically heated: 48 KW on 480/3/60

nnnnrnnnnn

• Product load: 80 lbs per foot; Dwell time: 40 minutes @ 2.0 FPM

nnnnrn

nnnnrnnnrn

Special Features

rnnnnnrnnnPowered Roller Conveyor – to deliver product to the load end. Includes a pop-up transfer conveyor section at the oven exit to transfer product from the indexing oven conveyor to the powered roller conveyor.nnrnnnrnnnInsulated Walls – 3″ insulated walls with an aluminized steel exterior and interior skin within a structural steel framennrnnnrnnnAir Circulation – exhaust fan with manual and top mounted, aluminized steel air supply duct with high velocity nozzles and recirculation fan with TEFC motor.nnrnnnrnnnHeating Elements – metal sheath electric heating elements installed in the recirculation air streamnnrnnnrn

rn

rn

rn

rn

rn

rn

rn

July 29, 2014

rn

rn

Drying Oven for Curing Wood Paint Custom-Built for Siding Manufacturer

rnnnnnrnnnnn

rnnnnn
• For curing water-based paint on fiber cement and wood boards

nnnnrnnnnn

• Gas fired drying oven with shuttle and transfer conveyor

nnnnrnnnnn

• Temperature: 150°F Operate, 200°F Maximum

nnnnrnnnnn

• Dwell Time: 4 minutes (in heat zone) @ 5 FPM

nnnnrnnnnn

• Water Load: 15 Gallons per hour (max.)

nnnnrnnnnn

• Product Load: 13,000 lbs. per hour (max.)

nnnnrnnnnn

• Maximum product width: 16”

nnnnrnnnnn

• Overall Oven Size: 51’‑6″ Long x 29’‑3″ Wide x 9’‑11″ High

nnnnrn

nnnnrnnnrn

SPECIAL FEATURES

rnnnPop-up Style Transfer Conveyer – Powered roller conveyor with high speed pop-up transfer chains located between rollers rapidly transfers the boards 90° from the in-line coater direction to the side travel oven/cooling direction.nnrnnnrnnnnnrnnnInboard Optical Sensor – Inboard optical sensor initiates transfer by sensing the trailing edge of the board.nnrnnnrnnnGraphical Operator Control Station – Control station supports ethernet connectivity, FLASH card for data storage, programming over the Internet, and networking capabilities with PLCs via ethernet.nnrnnnrnnnCirculation – 4 flash off fans and 3 cooling fansnnrnnnrnnnRef. # 7627nnrnnnrnnnrn

Contact us to learn more

August 6, 2014

rnnnrn

rn

Oven for Curing Rubber Parts Shipped

rnnnnnnnrnnnnn

rnnnnn
• Electrically heated batch oven, 450°F Operating Temperature, 500°F Maximum Temperature (72kW)

nnnnrnnnnn

• Interior Dimensions: 6′ width x 6′ length x 6′ height

nnnnrnnnnn

• Bi-parting doors on one end of the oven for loading and unloading of customer supplied carts

nnnnrn

nnnnrnnnrn

SPECIAL FEATURESnnrn

nnrn

Insulated Floor w/ Cart Tracks – Oven is supplied with an insulated floor to prevent any possible damage to the facility floors.  Cart guide tracks make it easier to load and unload the carts containing parts.nnrn

nnrn

Water Misting System – A water misting system is supplied in case of a fire in the oven because the rubber parts contain a high amount of volatile material.  The uncontrolled temperature of a flame will trigger the system to release water which will turn into a mist and suppress the fire while not jeopardizing the integrity of the oven wall insulation.  nnrn

nnrn

nnrn

Digital Temperature Controller & Recorder – The controller contains a digital display screen and can store recipes for the customer’s different heating cycles.  A front USB port is also provided for a storage drive to be uploaded and downloaded to/from the controller to a computer.  The digital temperature recorder is a paperless solution that allows you to track the oven air temperature at different times during a heating cycle.nnrn

nnrn

nnrn

Ref. #7643nnnnrn

Contact us to learn more.