Introducing the SCHMIDT SmartPress

Can a Hand Press be Smart?
Yes, it can!

By popular demand SCHMIDT has developed the SmartPress with Cycle Permissive and Part Presence Sensing Controls for SCHMIDT Manual Toggle Presses. The SmartPress features a modified SCHMIDT® Return Stroke Lock, pneumatic cylinder, pneumatic package and small PLC.

Certain conditions have to be met before the press can be cycled. After the operator has completed a full ram stroke the device releases the handle, so the ram can return to the home position.

You will profit from …

  1. Each assembly contains 100% of its components
  2. Greatly enhanced operator safety
  3. Consistent cycle completion rates.

…all this for a low investment.

Learn more about this or other high quality pressing technologies SCHMIDT offers by contacting any one of the team members @ Blettner Engineering or by calling 317-862-9580.


IAI’s RCP6S Built-in Controller

Built-in Controller Type RCP6S

Standard/separate controller type RCP6 or built-in controller type RCP6S can be selected for all models. A maximum of 16 axes of RCP6S (relayed through a hub unit) can be connected to one gateway unit. In addition, the gateway unit can supply the motor power and control power needed for all connected axes, therefore only requiring one cable (power and communication line) for the RCP6S.

 

Built-in Controller Type RCP6S

RCP6S with built-In controller advantages: 

  • Control panel can be smaller
  • Wiring can be easier
  • Reduced maintenance parts since a common cable is used

 

 

 

 

RCP6S Gateway Controller

RCP6S Gateway Controller
This controller can connect RCP, RCA, and RCD series actuators to an RCP6S gateway unit and hub unit.

Mini ROBO Cylinders and gripper type actuators can be added to the RCP6S network.

 

 

 

 

RCP6 Product Types

  • Rod Type
  • Radial Cylinder Type
  • Wide Type
  • Table Type
  • Slider Type
  • Cleanroom Slider Type
  • Cleanroom Wide Slider Type
  • Dust/ Splash-proof Rod Type
  • Dust/ Splash-proof Radial Cylinder
  • Dust/ Splash-proof Wide Radial Cylinder

Features of the Wide Type

(1) Wide Slider Type: Allowable dynamic moment is 14 times higher than the standard slider.

(2) Wide Radial Cylinder: Allowable torque on the rod tip is 3 times higher than the standard radial cylinder.

 

Equipped with High Resolution Battery-less Absolute Encoder as StandardRCP6 encoder Battery-less

Battery maintenance is not required because there is no battery.

Since home-return is not required at equipment startup or after an emergency stop, this feature reduces operation time and production costs.

Price is the same as the conventional incremental encoders.

battery-less absolute encoder

 

 

Improved Positioning Repeatability for Standard Specification: ±10μm

±20μm of positioning repeatability for the

current ROBO Cylinder has improved.

 

 

 

Selection of PowerCON® Compatible Controllers Is Available

The RCP6 is compatible with PowerCON, the controller equipped with a high-output driver.

The stepper motor achieves higher output, thanks to the PowerCON. This has reduced production cycle time, leading to improved productivity.

You can choose from two controllers with PowerCON: the “separate type” and “built-in type”.

Click here for more information and product catalog.

For more information on the ELECYLINDER contact any one of the team members @ Blettner Engineering or by calling 317-862-9580.


Sankyo Automation BR Series Ring Indexing Table

From Sankyo Automation, the BR Series ring indexer has a larger bore for mounting tooling, automation components or a robot in the bore of the housing. Output motions are programmable with the servo motor drive. Featuring low backlash, this system includes an internal gear reduction for light loading at high speeds. With an optional inline or right angle reducer, heavy loading at high speeds are achievable, We use the servo motor brand of your choice to avoid additional cost & training.

Sankyo ring indexer

Features:

  • Low Backlash
  • Speed & Accuracy
  • Rigidity
  • Versatility
  • Low Profile Footprint

Click here for more product catalog and more information.

 

For more information on the BR Series Ring Indexing Table contact any one of the team members @ Blettner Engineering or by calling 317-862-9580.


American Feeding Systems, Inc. Has a New Address

American Feeding Systems, Inc. has recently moved to a new location.

American Feeding Systems has moved

New address & Contact Info:

15425 Endeavor Dr.
Noblesville, IN 46060-4921

Tel 317-773-5517
Fax 317-773-6044

American Feeding Systems, Inc. has been designing and building high quality vibratory feeders to solve manufacturing problems since 1982.

To talk more about how American Feed Systems, Inc. can solve your manufacturing needs, contact any one of the team members @ Blettner Engineering or by calling 317-862-9580.


New Product from IAI: IXA SCARA Robot

IXA SCARA Robot

new IXA SCARA Robot from IAI

  • Fastest in the Industry
  • Achieves lower price
  • Low Vibration, accurate positioning
  • Equipped with a battery-less Absolute Encoder as standard

To learn more about the IXA SCARA Robot, contact any one of the team members @ Blettner Engineering or by calling 317-862-9580.


Contact

317-862-9580

Location

Blettner Engineering Co., Inc.
8919 Southeastern Ave.
Indianapolis, IN 46239

Questions about assembly or automation solutions? Request Info