News


Drying Oven for Curing Wood Paint Custom-Built for Siding Manufacturer

July 29, 2014

rn

rn

Drying Oven for Curing Wood Paint Custom-Built for Siding Manufacturer

rnnnWood Paint Curing Oven for Siding Manufacturernnrnnnnn

    rnnnnn

  • For curing water-based paint on fiber cement and wood boards
  • nnnnrnnnnn

  • Gas fired drying oven with shuttle and transfer conveyor
  • nnnnrnnnnn

  • Temperature: 150°F Operate, 200°F Maximum
  • nnnnrnnnnn

  • Dwell Time: 4 minutes (in heat zone) @ 5 FPM
  • nnnnrnnnnn

  • Water Load: 15 Gallons per hour (max.)
  • nnnnrnnnnn

  • Product Load: 13,000 lbs. per hour (max.)
  • nnnnrnnnnn

  • Maximum product width: 16”
  • nnnnrnnnnn

  • Overall Oven Size: 51’‑6″ Long x 29’‑3″ Wide x 9’‑11″ High
  • nnnnrn

nnnnrnnnrn

SPECIAL FEATURES

rnnnPop-up Style Transfer Conveyer – Powered roller conveyor with high speed pop-up transfer chains located between rollers rapidly transfers the boards 90° from the in-line coater direction to the side travel oven/cooling direction.nnrnnnrnnnPop-Up Style Transfer ConveyornnrnnnInboard Optical Sensor – Inboard optical sensor initiates transfer by sensing the trailing edge of the board.nnrnnnrnnnGraphical Operator Control Station – Control station supports ethernet connectivity, FLASH card for data storage, programming over the Internet, and networking capabilities with PLCs via ethernet.nnrnnnrnnnCirculation – 4 flash off fans and 3 cooling fansnnrnnnrnnnRef. # 7627nnrnnnrnnnrn

Contact us to learn more


Oven for Curing Rubber Parts Shipped

August 6, 2014

rnnnrn

rn

Oven for Curing Rubber Parts Shipped

rnnnOven for Curing Rubber Partsnnnnrnnnnn

    rnnnnn

  • Electrically heated batch oven, 450°F Operating Temperature, 500°F Maximum Temperature (72kW)
  • nnnnrnnnnn

  • Interior Dimensions: 6′ width x 6′ length x 6′ height
  • nnnnrnnnnn

  • Bi-parting doors on one end of the oven for loading and unloading of customer supplied carts
  • nnnnrn

nnnnrnnnrn

SPECIAL FEATURESnnrn

nnrn

Insulated Floor w/ Cart Tracks – Oven is supplied with an insulated floor to prevent any possible damage to the facility floors.  Cart guide tracks make it easier to load and unload the carts containing parts.nnrn

nnrn

Water Misting System – A water misting system is supplied in case of a fire in the oven because the rubber parts contain a high amount of volatile material.  The uncontrolled temperature of a flame will trigger the system to release water which will turn into a mist and suppress the fire while not jeopardizing the integrity of the oven wall insulation.  nnrn

Rubber Parts Curing Oven showing bi-parting doorsnnrn

nnrn

Digital Temperature Controller & Recorder – The controller contains a digital display screen and can store recipes for the customer’s different heating cycles.  A front USB port is also provided for a storage drive to be uploaded and downloaded to/from the controller to a computer.  The digital temperature recorder is a paperless solution that allows you to track the oven air temperature at different times during a heating cycle.nnrn

nnrn

Rubber Partsnnrn

Ref. #7643nnnnrn

Contact us to learn more.


Filter Adhesive Curing Oven Designed for Major Automotive Manufacturer

August 19, 2014

rn

rn

Filter Adhesive Curing Oven Designed for Major Automotive Manufacturer

rnnnnn

    rnnnnn

  • Gas fired cure ovenFilter-Adhesive-Curing-Oven-Automotive-Manufacturer.
  • nnnnrnnnnn

  • 377º F Operating, 450º F Maximum
  • nnnnrnnnnn

  • Product size: 2.5” x 4”
  • nnnnrnnnnn

  • Overall oven size: 16’‑0″ Long x 6’‑2″ Wide x 8’‑0″ Highnn
  • nnnnrnnnnn

  • Belt Conveyornn
  • nnnnrn

nnnnrnnnrn

SPECIAL FEATURES

rnnnnnnnrnnnGas Convection Equipment –  Nozzle mixing type gas burners provide a wide range of turn-down. Burner includes integral blower for combustion, so that changes in air circulation within the oven don’t affect burner operation.nnrnnnrnnnBelt Conveyor – Steel slide bed supported conveyor running the length of the oven.nnrnnnrnnnOven Construction – Insulated floor and separate insulated heater housing, equipped with fresh air inlet and manual damper.nnrnnnrnnnAccesss Doors –  Separate access doors for heater and blower housing, equipped with pressure relief latches and door seals.nnrnnnrnnnRef. #7647nnrnnnrn

Contact us to learn more.


Steam Heated Sterilizing Oven Shipped to Leading Health Care Supplier

November 4, 2014

rnnnrn

Steam Heated Sterilizing Oven Shipped to Leading Health Care Supplier

rnnnSteam-Heated-Sterilizing-Oven-Health-Carennnnrnnnnn

    rnnnnn

  • For sterilizing pallets of isopropyl alcohol filled glass ampules
  • nnnnrnnnnn

  • Temperature: 66.5°C +/-3°C (75°C Max)
  • nnnnrnnnnn

  • Overall oven size: 23’ long x 7’ wide x 8.75’ high
  • nnnnrnnnnn

  • Chamber size: 22’ long x 4.5’ wide x 7’ high
  • nnnnrnnnnn

  • Product load: 5 pallets
  • nnnnrnnnnn

  • Heating coils: 270,00 BTUH
  • nnnnrn

nnnnrnnnrnnnrn

SPECIAL FEATURES

rnnnnn

    rnnnnn

  • Steam Heating Coils – Steam heat coil assembly mounted in the recirculation air stream for maximum heat transfer.
  • nnnnrnnnnn

  • Dry Heat Oven – Five station dry heat with containment trench and pan.
  • nnnnrnnnnn

  • Duct Work – Cross flow, side mounted supply/return ducts with adjustable high velocity slots
  • nnnnrnnnnn

  • rnnnIn-Shop and Onsite Testing – Oven tested at Infratrol and onsite, and included field installation, start-up, and training.nnrn
  • nnnnrn

nnnnrnnnrnnnrnnnRef. 7661nnrnnnnnnnrn

Contact us to learn more.nn


Partial Vacuum Rubber Curing Oven Shipped to Building Products Manufacturer

November 11, 2014

rn

rn

Partial Vacuum Rubber Curing Oven Shipped to Building Products Manufacturer

rnnnPartial Vacuum Rubber Curing Ovennnrnnnnn

    rnnnnn

  • rnnnFor curing silicone and EPDM rubber weather strippingnnrn
  • nnnnrnnnnn

  • rnnnElectrically heated partial vacuum ovennnrn
  • nnnnrnnnnn

  • Temperature: 400°F Operate, 500°F Maximum
  • nnnnrnnnnn

  • Vacuum Pressure: 15 in. Hg
  • nnnnrnnnnn

  • Product Handling: 5,000 to 7,000 feet of product rolled onto a reel cart
  • nnnnrnnnnn

  • Equipment Size: 7’10” Deep x 12’0″ Wide x 9’7″ High
  • nnnnrn

nnnnrn

rn

SPECIAL FEATURES

rnnnnn

    rnnnnn

  • VACUUM PUMP: Claw-type vacuum pump to exhaust vapors from the process. Vapors are condensed in a receiving vessel so that condensed byproducts of the process can be captured and reprocessed for secondary uses. 
  • nnnnrnnnnn

  • CHAMBER ACCESS DOORS: Hinged access door with pressure relief latches and a pneumatically inflated door seal on all four edges of the door, and pneumatic door assists option.
  • nnnnrnnnnn

  • TESTING: Oven included shop assembly and testing, as well as field installation, testing, and training.nn
  • nnnnrn

nnnnrnnnrnnnPartial-Vacuum-Rubber-Curing-Oven.nnrnnnrnnnrnnnFoam-Rubber-Weather-Strippingnn nnrnnnrnnnrnnnrnnnrnnnrnnnrnnnrnnnrnnnrnnnrnnnrnnnrnnnrn

Contact us to learn more.

rnnn 


Contact

317-862-9580

Location

Blettner Engineering Co., Inc.
8919 Southeastern Ave.
Indianapolis, IN 46239

Questions about assembly or automation solutions? Request Info