Automation & Assembly Solutions
nnrnnnrn
rnnnThe PCON stepper motor controller boosts the performance of our RCP4 electric actuators supporting a high-output driver. The speed has been increased 1.5 times and can handle payload twice as much as our conventional models.nnrnnnField networks DeviceNet, CC-Link, PROFIBUS-DP, CompoNet, MECHATROLINK (I, II), EtherCAT and EtherNet/IP are supported.nnrnnnLearn more about the PCON-CA controller.
rnnnFree Add-on Instructions (AOI) and User Defined Data Types (UDT) are available for IAI controllers ACON, PCON, SCON and MSEP-C, operating in Full-Direct communication mode only. * IAI Login required to download.nnrnnnThey are saved as exported .L5X files from RSLogix 5000 version 17 software, and can be imported into any RSLogix 5000 program that is version 17 or later.nnrnnn
nnrnnnImport Configuration Windownnrnnnrnnn* RSLogix and Rockwell Software are trademarks of Rockwell Automation, Inc. Trademarks not belonging to IAI America are property of their respective companies.nnrnnn nnrn
rnnnPlease click here to get Add-on Instructions for IAI controllers. (IAI Login required)nnrn
rnnnrnnnJanuary 19, 2015nnrnnnrnnnnn
Gas Fired Aluminum Billet Furnace for heating aluminum billets,nnwhich enter the press to be forged into pistonsnnProduction Rate: 240 to 360 parts per hour (4 to 6 parts per minute)nnOven Temperature: 850°F (950°F Maximum)nnDwell Time: 30 minutesnnProduct size: 3” diameter; 2.5” – 4” in lengthnnOverall Furnace size: 12’9” long x 11’4” wide x 12’ highnnnnrn
nnnnrnnnrnnnSPECIAL FEATURESnnrnnnrnnnnn
nnnnrnnnnn
Conveyor – Vertically mounted dual strand chain conveyornnsystem runs through the entire length of the furnace.nnEquipped with SS pedestals for loading billets. 60’ overallnnlength, speed 2 FPM.nnnnrnnnnn
nnnnrn
nnnnrnnnrnnn
SCHMIDT ElectricPress 43nnThe Component for your Automationnnrnnnrnnnrnnnnn
nnnnrn
nnnnrn
nnnnrn
nnnnrn
nnnnrnnnrnnnThe SCHMIDT ElectricPress is PLC controlled and does not require compressed air ornnhydraulic pressure. It can be easily and quickly integrated into automated systems.nnrnnnThe SCHMIDT ElectricPress can be parameterized and loaded with up to 14 differentnndrive sets; each with position, speed and acceleration/deceleration ramp with thennSCHMIDT EP Assistant software.nnrnnnParameterized drive sets are stored inside the integrated motor electronics.nnTo optimize application specific assembly processes, drive sets can be selectednnindividually with any external PLC to create adisplacement profile. This requiresnnonly 4 outputs and2 inputs.nnrnnnSCHMIDT ElectricPress offers: 4 kN maximum force, 150 mm/s maximum speed,nnand 100 mm stroke.nnrnnnrn
| Technical Data | ElectricPress 43 |
| Force F max. | 4 kN / 890 lbs |
| Force F 100 % continuous run | 2.5 kN / 560 lbs |
| Ram Stroke | 100 mm / 3,937 inch |
| Ram Speed max. | 150 mm/s |
| Drive Resolution | rnnn< 1 µm / 0.0000394 inchnnrn |
| Decibel Level | 60 dB A |
| Power Supplynn Motor Powernn Logic Unit | nn42 V DC / 13 A (25 A max.)nn24 V DC / 0.,5 A |
| H x D x W | 333 x 362 x 207 mm |
| Weight | 35 kg / 77.16 pound |
rnnn
nnrnnn nnrnnn nnrnnnnnNew Products Released !nnrnnnIntroducing the Cost-effective Pulse Motor Type IXP to the IX Series of SCARA Robots and the MSEL program controllersnnrnnn1. The pulse motors arrangment keeps the IXP costs at around 1/2 a conventional modelnn 2. All models come standard with battery-less absolute encodersnn 3. The robot weights approx. 30% less than a conventional modelnn 4. Added 3-axis specification and 4-axis gripper specificationnnrnLink to the Product Page for more information, and to Download PDF Catalog #: CJ0219-1A-UST-1-0814 (5.2 MB)
